Adhesive Films

• Ultra clear for Real Time PCR applications • Thin, easy to peel • Notched corner prevents peeling off of corner wells • (read more)

• Ultra clear for Real Time PCR applications
• Thin, easy to peel
• Notched corner prevents peeling off of corner wells
• Easy-tear pull tabs
• Versatile: use for all PCR applications
• Low-static for easy application and handling
• Made from polyester, -40° to 120° C temperature range
• Certified free of nucleases and DNA contamination, non-pyrogenic (hide)

Minimizes background fluorescence and cross talk between plate wells Ideal as a back seal for black plates with clear well bottoms (read more)

• Minimizes background fluorescence and cross talk between plate wells
• Ideal as a back seal for black plates with clear well bottoms for top reading measurements
• Absorbs stray light, reducing the background caused by light scatter
• Protects light sensitive samples from degradation
• Features a single split liner for easy application

(hide)

The porous membrane consists of layers of heat welded rayon fibers. Pore size from 10µm to 50µm Moisture vapor transmission (read more)

• The porous membrane consists of layers of heat welded rayon fibers.
• Pore size from 10µm to 50µm
• Moisture vapor transmission rate = 4,200g/m²/24hr
• Easy-to-pierce with serological pipets and pipet tips for direct sample recovery
• Available in roll format for automation: AeraSeal Roll-Seal

(hide)

Environmentally friendly; no paper liner to remove and discard; utilizes approximately 59% less material than AeraSeal sheeted film Each (read more)

• Environmentally friendly; no paper liner to remove and discard; utilizes approximately 59% less material than AeraSeal sheeted film
• Each sheet is separated by an adhesive-free, perforated, color-coded red band
• The smooth lower surface of the dispenser can be used to seal the film to the plate
• Dispenser protects unused seals from contamination
• Lower support prop prevents dispensing bill from contacting surfaces to prevent contamination
• Replacement rolls can be easily installed by releasing the locking clasps on the dispenser
• Designed to facilitate air and CO₂ exchange
• Pore size from 10µm to 50µm
• Moisture vapor transmission rate = 4,200g/m²/24hr
• Easy-to-pierce with serological pipets and pipet tips for direct sample recovery

(hide)

Certified DNase- & RNase- free Excellent chemical resistance (e.g. DMSO) Easily pierceable with single or multichannel pipettors (read more)

• Certified DNase- & RNase- free
• Excellent chemical resistance (e.g. DMSO)
• Easily pierceable with single or multichannel pipettors and robotic probes
• 1.4mil conformable aluminum foil allows visual verification of the seal’s security around each well

(hide)

Certified DNase- & RNase- free Ideal for use with 384-well and deep-well plates or select AlumaSeal® 96™ for smaller (read more)

• Certified DNase- & RNase- free
• Ideal for use with 384-well and deep-well plates or select AlumaSeal® 96™ for smaller cut for raised-rim and non-skirted PCR plates.
• Features one end-tab with no perforation
• Pierceable with a pipet tip or robotic probe for direct sample recovery
• Large cut allows for easier positioning of the foil to the plate via edge of plate alignment vs. centering
• A complimentary sealing paddle is included in each AlumaSeal® 96™ box

(hide)

Specially formulated for cold storage to -80 °C Excellent barrier properties to retard evaporation Easily pierceable with (read more)

• Specially formulated for cold storage to -80 °C
• Excellent barrier properties to retard evaporation
• Easily pierceable with pipet tips or robotic probes for sample recovery

(hide)

The light reflective properties on clear-bottom plates maximize the sensitivity of bioluminescence and chemiluminescence assays in (read more)

• The light reflective properties on clear-bottom plates maximize the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers
• Maximizes intensity and signal-to-noise ratios in luminescence assays
• May be used as a backing matrix for microscopy of punchout samples for filter plates (e.g. ELISPOT assays)
• Features a single split liner for easy application

(hide)

• Color dots and white labeling area on end tabs • Second tab can be separated for lab-notebook insertion • End tabs can be (read more)

• Color dots and white labeling area on end tabs
• Second tab can be separated for lab-notebook insertion
• End tabs can be left on plate even if center of sealing film is removed
• Functional temperature range -40°C to +120°C (hide)

• Two tabs on each strip for easy application and removal • Perforated tabs can be removed or sealed around plate edge C • (read more)

• Two tabs on each strip for easy application and removal
• Perforated tabs can be removed or sealed around plate edge C
• Can be used as secondary seal to cover sealing films that have been pierced
• More convenient
• Apply to plates singly or two-at-a-time (hide)

Provides a secure seal and is easy to remove Rigid polyester film features good clarity and easy handling Can be used as a temporary (read more)

• Provides a secure seal and is easy to remove
• Rigid polyester film features good clarity and easy handling
• Can be used as a temporary economical seal while awaiting further processing
• Features two end-tabs with perforations

(hide)

Designed for use with standard 96-well plates where rows must be selectively protected or accessed. Certified DNase- & RNase- (read more)

• Designed for use with standard 96-well plates where rows must be selectively protected or accessed.
• Certified DNase- & RNase- free
• Ultra-high optical clarity
• Features a soft conformable adhesive which forms a very strong seal around raised wells to minimize evaporation and cross-contamination
• Ideal for use with flat-top and hard-shell dual component (e.g. polycarbonate / polypropylene) PCR plates
• Available in a smaller cut for raised-rim and non-skirted PCR plates: ThermalSeal RT2RR
• Not recommended for removal after thermal cycling

(hide)