Product Description
LIGHT LABS is proud to offer the MTC Bio ILP Glass Coated Multiwell Plate (Cat # DP1M-RD-96-GC10) — a 96-well round well U-bottom deep well plate featuring the proprietary SiO₂ (silicon dioxide) quartz glass-coated wells of the ILP Glass Coated Plate line in an extra-deep 42.50mm well height with 1.2 mL well volume. The DP1M-RD-96-GC10 is the penultimate depth in the ILP Glass Coated 96-well round well lineup — with 9.50mm more well depth than the standard 33mm deep well formats (DP10UR, DP11VR) and 2.80mm less depth than the maximum-volume DP2M-RD-96-GC10 (45.30mm, 2.0 mL). This extra-deep format is designed for applications requiring the deepest possible well access with robotic probes, pipet tips, and needle samplers while maintaining a 1.2 mL working volume.
The 42.50mm height of the DP1M-RD-96-GC10 is particularly significant for autosampler needle sampling workflows — many LC-MS/MS autosamplers use long needle probes that require extra-deep wells to minimize dead volume and maximize sample aspiration from the well bottom. The extra depth of the DP1M-RD-96-GC10 ensures the autosampler needle can reach close to the well bottom for complete, low-dead-volume sample aspiration — a critical advantage in bioanalytical workflows where precious patient samples or high-value compounds must be transferred with minimal loss. The SiO₂ glass coating further maximizes recoverable sample by minimizing adsorption of analytes to the well surface, making this the optimal plate for quantitative LC-MS/MS bioanalytical sample management from a glass-coated well. LIGHT LABS is your trusted source for MTC Bio ILP Glass Coated Plates.
KEY FEATURES
- Extra-deep 96-well round well U-bottom format — 42.50mm well height, 1.2 mL well volume; 9.50mm deeper than standard 33mm deep well formats for maximum probe and needle access
- Optimized for autosampler needle sampling — extra depth enables long needle probes to reach close to the well bottom for complete, low-dead-volume aspiration of precious samples
- 1.2 mL well volume — slightly larger than the standard 33mm deep well formats (1.1 mL) for increased sample storage capacity
- Proprietary SiO₂ (silicon dioxide) quartz glass inner well coating — creates a molecularly thin glass barrier between sample and PP well wall; glass-like surface properties in a plastic plate format
- Eliminates plastic leaching — SiO₂ barrier dramatically reduces extractables and leachables from PP into sensitive bioanalytical samples
- Reduced oxygen transmission rate — glass coating reduces O₂ permeation through well walls; critical for oxygen-sensitive analytes
- Superior chemical resistance — glass-like resistance to organic solvents including DMSO, ACN, MeOH, and other common bioanalytical solvents
- Minimizes analyte adsorption — glass surface reduces non-specific adsorption of lipophilic compounds, proteins, and drugs; maximizes quantitative recovery for LC-MS/MS
- Eliminates need for glass inserts in extra-deep well plate formats
- Automation compatible — fits autosamplers and liquid handlers accommodating 42.50mm deep well plates
- Thermally and chemically stable: -80°C to +80°C
- Packaged 10 plates per pack
SPECIFICATIONS
| Attribute | Detail |
|---|---|
| Catalog Number | DP1M-RD-96-GC10 |
| Brand | MTC Bio / ILP (Innovative Laboratory Products) |
| Product Name | ILP Glass Coated Multiwell Plate |
| Well Format | 96 Well, Round |
| Well Bottom | U-Bottom |
| Well Volume | 1.2 mL |
| Well Height | 42.50 mm |
| Well Coating | SiO₂ (silicon dioxide) quartz glass — inner well surface |
| Well Material | Polypropylene (outer) + SiO₂ glass coating (inner) |
| Temperature Range | -80°C to +80°C |
| Automation Compatible | Yes — autosamplers and liquid handlers for 42.50mm deep well plates |
| Plate Format | SBS standard footprint |
| Packaging | 10 plates/pack |
KEY ADVANTAGES OF SiO₂ GLASS COATING vs. STANDARD PP PLATES
| Challenge | Standard PP Plate | ILP Glass Coated Plate |
|---|---|---|
| Plastic Leaching | PP can release trace additives into samples | SiO₂ barrier eliminates contact between sample and polymer |
| Oxygen Transmission | O₂ permeates through PP walls | Glass coating reduces O₂ transmission rate |
| Lipophilic Adsorption | Compounds stick to PP surface, reducing recovery | Glass surface reduces non-specific adsorption |
| Chemical Resistance | Limited vs. organic solvents | Glass-like resistance to solvents and aggressive chemicals |
| Glass Inserts | Required for glass-like performance | Eliminated — glass coating achieves same result |
FULL DEPTH COMPARISON — ILP GLASS COATED 96-WELL ROUND WELL PLATES
| Cat # | Bottom | Well Height | Well Volume | Best For |
|---|---|---|---|---|
| DP35UR-9-GC10 | U-Bottom | 14.40 mm | 500 µL | Shallow format general storage |
| DP04UR-9-GC10 | U-Bottom | 14.75 mm | 335 µL | Shallow intermediate volume |
| DP36VR-9-GC10 | V-Bottom | 14.60 mm | 300 µL | Shallow V-bottom concentration |
| DP12UR-9-GC10 | U-Bottom | 31.50 mm | 1.1 mL | Standard deep well, lower clearance |
| DP10UR-9-GC10 | U-Bottom | 33.00 mm | 1.1 mL | Standard deep well height |
| DP11VR-9-GC10 | V-Bottom | 33.00 mm | 1.1 mL | Standard deep well V-bottom |
| DP1M-RD-96-GC10 | U-Bottom | 42.50 mm | 1.2 mL | Extra-deep; autosampler needle access |
| DP2M-RD-96-GC10 | U-Bottom | 45.30 mm | 2.0 mL | Maximum volume and depth |
APPLICATIONS
- LC-MS/MS bioanalytical sample management requiring extra-deep well needle access
- Autosampler needle sampling from deep wells with minimal dead volume
- Compound library storage at 1.2 mL in extra-deep glass-coated format
- Precious sample storage requiring maximum glass-like inertness and analyte recovery
- Multi-step sample preparation workflows requiring extra-deep well volume
- Drug metabolism and pharmacokinetics (DMPK) sample management
- Clinical bioanalytical sample storage and management in glass-coated format
- Any LC-MS/MS bioanalytical workflow requiring extra-deep 96-well round well glass-coated plates
ORDERING INFORMATION — MTC BIO ILP GLASS COATED MULTIWELL PLATES
96 Round Well Plates — SiO₂ Glass Coated
| Cat # | Description | Bottom | Well Height | Well Volume | Qty/Pack |
|---|---|---|---|---|---|
| DP1M-RD-96-GC10 | Glass Coated Plate, 96 Round Well | U-Bottom | 42.50 mm | 1.2 mL | 10 |
| DP2M-RD-96-GC10 | Glass Coated Plate, 96 Round Well | U-Bottom | 45.30 mm | 2.0 mL | 10 |
| DP10UR-9-GC10 | Glass Coated Plate, 96 Round Well | U-Bottom | 33.00 mm | 1.1 mL | 10 |
| DP11VR-9-GC10 | Glass Coated Plate, 96 Round Well | V-Bottom | 33.00 mm | 1.1 mL | 10 |
| DP12UR-9-GC10 | Glass Coated Plate, 96 Round Well | U-Bottom | 31.50 mm | 1.1 mL | 10 |
| DP35UR-9-GC10 | Glass Coated Plate, 96 Round Well | U-Bottom | 14.40 mm | 500 µL | 10 |
| DP36VR-9-GC10 | Glass Coated Plate, 96 Round Well | V-Bottom | 14.60 mm | 300 µL | 10 |
| DP04UR-9-GC10 | Glass Coated Plate, 96 Round Well | U-Bottom | 14.75 mm | 335 µL | 10 |
96 Square Well Plates — SiO₂ Glass Coated
| Cat # | Description | Bottom | Well Height | Well Volume | Qty/Pack |
|---|---|---|---|---|---|
| DP21US-9-GC10 | Glass Coated Plate, 96 Square Well | U-Bottom | 41.60 mm | 2.0 mL | 10 |
| DP22VS-9-GC10 | Glass Coated Plate, 96 Square Well | V-Bottom | 41.20 mm | 2.2 mL | 10 |
384 Square Well Plates — SiO₂ Glass Coated
| Cat # | Description | Bottom | Well Height | Well Volume | Qty/Pack |
|---|---|---|---|---|---|
| DP120-SQ-384-GC10 | Glass Coated Plate, 384 Square Well | U-Bottom | 14.40 mm | 120 µL | 10 |
| DP24VS-384-GC10 | Glass Coated Plate, 384 Square Well | V-Bottom | 24.90 mm | 200 µL | 10 |
